New tool LPro Magic Hello was released
Bypass devices 6s-X ,iPads till a9/2017included
This Service For Mac Os Only
No Need JB
Have in mind it’s without network-wifi only ! At least for now
Link:
DCSD Cable need for this operation !!!
Lpro Magic Hello V1.0
GUIDE TO FOLLOW:
Step 1: Put DFU Mode
Step 2: Preload PwnDFU
Step 3: Preload Device(The Device Screen Will Turn Purple)
Change USB Cable > To > DCSD Cable at This Stage. Proceed to Step 4
Step 4: Preload Check(The Device Will Restart)
Preload Check Button The Function is to change the Serial Number of the Device
After the operation is Complete, the Device will automatically Restart
Step 5: Enter DFU Mode Again
Step 6: Run PwnDFU
Step 7: Boot Device
Step 8: Check SSH (Wait for the Button to light up to become this Check SSH ✔️)
Step 9: Activation Device
Wait for the Device to turn on and the Device is Successfully Activated
—————————————————————
ALTERNATIVE METHOD
—————————————————————
Step 1: User manually changes the Serial Number provided by us
Step 2: Then Restart the Device
Step 3: Click Preload Check
Then restart the device to enter DFU mode, and start the following steps to Activate the Device
1. Run PwnDFU
2. Boot Device
3. Check SSH (Wait for the Button to light up to become this Check SSH ✔️)
4. Activation Device
Wait for the Device to turn on and the Device is Successfully Activated
Auto method:
Manual method:
Bypass devices 6s-X ,iPads till a9/2017included
This Service For Mac Os Only
No Need JB
Have in mind it’s without network-wifi only ! At least for now
Link:

LproMagicHelloV1.0
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
DCSD Cable need for this operation !!!
Lpro Magic Hello V1.0
GUIDE TO FOLLOW:
Step 1: Put DFU Mode
Step 2: Preload PwnDFU
Step 3: Preload Device(The Device Screen Will Turn Purple)
Change USB Cable > To > DCSD Cable at This Stage. Proceed to Step 4
Step 4: Preload Check(The Device Will Restart)
Preload Check Button The Function is to change the Serial Number of the Device
After the operation is Complete, the Device will automatically Restart
Step 5: Enter DFU Mode Again
Step 6: Run PwnDFU
Step 7: Boot Device
Step 8: Check SSH (Wait for the Button to light up to become this Check SSH ✔️)
Step 9: Activation Device
Wait for the Device to turn on and the Device is Successfully Activated
—————————————————————
ALTERNATIVE METHOD
—————————————————————
Step 1: User manually changes the Serial Number provided by us
Step 2: Then Restart the Device
Step 3: Click Preload Check
Then restart the device to enter DFU mode, and start the following steps to Activate the Device
1. Run PwnDFU
2. Boot Device
3. Check SSH (Wait for the Button to light up to become this Check SSH ✔️)
4. Activation Device
Wait for the Device to turn on and the Device is Successfully Activated
Auto method:
Manual method: